Assembly Instructions
Assembly Instructions
If you need any technical support, please contact us info@kabonbike.com
The KABON Road Bikes and Mountain Bikes have been assembled 95%, only the handlebars, seat tube, pedals, and front wheel need to be installed. The derailleurs and brakes has been tuned, just pump up the tires and it's ready to ride.
Videos
Road bike installation video for reference:
Folding bike unboxing video for reference:
Attention
- Open box, be careful to keep the box intact and hold on the packing materials as you can use it for future shipping of your bike.
- Turn fork to forward position: The dropouts pf the fork should face forward.
- Do not force a pedal that will not thread on easily or you may cross thread the crank arm and cause damage. Pedal threads are different from Left side and right side!
- Derailleur adjustment
Torque range
- Handlebar, Stem: 5-6Nm
- Saddle, Seatpost, Quick release or Thru Axles : 9-12Nm
PRE-RIDE CHECK LIST
- Make sure the rear and front derailleur shifts smoothly up and down the cog set by pedaling the bike and clicking up and down each gear.
- Give your tires a firm squeeze. Make sure the tires maintain reasonable tire pressure (30-70PSI). They shouldn't have much squish.
- Check Brakes Disc or Rim - Depress brake lever 5 times to check that brakes are making contact with the disc or wheel, brake lever stops mid-way, and spin your wheels to check that the brakes are not rubbing.
- Check Quick Releases or Thru Axles - Make sure quick releases or thru axle levers are closed and that each and every bolt on your bike is tight and secure.
- Correct Saddle Height - Ensure saddle angle is level with the ground and near center on the rails; start saddle height 1 to 2 inches below the top of your hip.